top of page

MICROFIBER

Constant Tension Transport with Electronic Servo Drive (CTT-E) is a dynamic test instrument that is available as a mini laboratory for yarns. With its interchangeable test modules, the CTT-E can run more than 10 tests on the same instrument for all natural and synthetic yarns as well as technical yarns such as aramids, carbon, glassfiber and spandex. With this versatility along with its dynamic test principle that will test every section of the yarn, the CTT-E offers the ability to eliminate high cost of running trials on actual production machines before the yarn is sent to the next textile process.

CTT-E ALL-IN-ONE DYNAMIC YARN TESTER

LH-450 CTT-E
  • Electronic Servo Drive and Tension Arm System that maintain 2g-1000g constant input tension at test speeds between 20-1000m/min

  • Offers dynamic test conditions that tests every section of yarn to predict yarn behavior and avoid high cost of running trials on production machines

  • Easy to install test modules that allow measurement from coefficient of friction, entanglement count to yarn appearance on the same instrument

  • Four Tension Arms with different max tension and sensitivity ranges

  • Available with Standard (1000g) and Spandex Range (100g) tension measurement heads

  • Applicable for all types of natural and synthetic yarns, including cotton, polyester, nylon, wool, silk, acrylic, flax, viscose, carpet yarns

  • Functional tests for technical yarns such as aramids, carbon, spandex, glassfiber and monofilament

MICROFIBER

FAK-S FIBER ANALYSIS KNITTER SAMPLER

LH-122 FAK-S

The Lawson Hemphill FAK-Sampler, FAK-S is recognized as the worldwide standard for lab knitting machines. It is a high-speed, precision knitting machine designed to check uniformity and consistency of the yarn quickly and accurately. It is ideal for use in production control and R&D labs as well as dyeing plants.

In any knitting application, the yarn tension and the yarn feed controls are critical to ensure fabric uniformity. Any changes in these variables during knitting will cause irregularities, creating a defective fabric. The FAK-S has a built-in Stitch Control System, which ensures the preparation of the standard samples of knit fabric for yarn quality control purposes. The machine also features a take-up assembly to collect the fabric under controlled tension to further ensure fabric uniformity.

The FAK-S can knit all types of yarns, including synthetic and natural fibers as well as monofilament, filament, elastomeric and spun yarns. Nine different cylinder sizes are available to knit yarns from 10d up to 2000d. All knitting cylinders are interchangeable and can be used with all Lawson Hemphill knitters. (Please consult Lawson Hemphill for knitting higher or lower denier yarns).

faks lh122-fak-s 400-400c.png
  • Precision lab knitting machine with Stitch Control System to prepare standard samples of knit fabric for quality control purposes

  • Ability to knit all types of yarns, including synthetic and natural fibers as well as monofilament, filament, elastomeric and spun yarns

  • The only sample knitting machine trusted with spectrophotometer for color and dye analysis

  • Maintains constant course length with the Yarn Meterhead to ensure uniform loop size

  • Maintains constant tension on the yarn with the Air Servo/Stitch Cam Regulator to eliminate fabric defects such as barre, which is caused by tension variation during knitting

  • Features fabric take-up assembly to collect the fabric under controlled tension to ensure fabric uniformity

  • Nine different cylinder sizes available to knit yarns from 10d up to 2000d (Please consult us for higher or lower denier ranges.)

  • Interchangeable knitting cylinders that can be used in all Lawson Hemphill knitting machines

bottom of page